Perforated Pipe for Wedge Wire

• Material: Metal
• Layers: Single
• Usage: Liquid Filter, Solid Filter
• Type: Filter Cylinder
• Hole Shape: Square
• Structure: Single Network
• Model NO.: XL-FY601
• Diameter: 27-1500mm ( 1-59inch)
• Length: up to 6.05m
• Slot / Gap: 0..05-60mm
• End Connection: Welded Rings, Threaded, Flange
• Profile Wire: 1.5X2,1.5X2.5,2X3.5,3X4.6,3X5.5,3.5X5mm
• Support Wire: 1.5X2.0,1.5X2.5,2.0X3.5,3X4.6,3.0X5.5,3.5X5.0mm
• Support Bar: 1.5X20,1.8X10,2.0X10,3.0X10,2X25mm,2.5X30mm
• Transport Package: Wooden Box, Pallet, Container
• Specification: to order
• Trademark: XL(FY)
• Origin: Xinlu Wire Mesh, Anping County
• HS Code: 84139100
• Production Capacity: 300m Per Day

Product Description

Perforated Pipe for Wedge Wire
The perforated pipe adopted advanced ways to soak. Our water drainage pipes are always fully accessible for inspection and maintenance.
Manufacturing perforated drainage pipe in diameters from 0.3m to 3.6m to fit any situation, we can produce pipe systems or vertical rings or a combination of the two. We can also provide a full design and detailing service, consistent with SUDS, using the latest software.
We can determine the suitability and performance of a soak away or infiltration system according to three criteria:
The capacity of the soil to infiltrate water - the "infiltration coefficient"
Existing or historic groundwater levels - should be at least 1m below the invert of the intended soak away
The plan area available for sitting the soak away unit
Supplication:
Hole: 3mm
Pitch: 5, 7mm
Open area: 25.4%
Diagonally perforated

Surface Profiles	Support Profiles	Min. diam. mm	Min. slot width mm
10S	Q25	21	0.10
11S	Q20 or Q25	23	0.030
12S	22S	30	0.050
12S	Q25	23	0.030
12S	Q35	30	0.050
18S	22S or Q35	30	0.050
18S	Q25	25	0.030
18S	D45	300	0.20
18S	10x3	300	0.20
22S	22S or Q35	45	0.10
22S	D45 or 10x3 or 25x3	300	0.20
28S	Q35	215	0.20
28S	D45 or 10x3 or 25x3	300	0.20
34S	Q35	300	0.20
34S	D45	300	0.20
34S	10x3 or 25x3	300	0.20
42S	Q35 or D45	300	0.20
42S	10x3 or 25x3	300	0.20

Diameters

Outside diameter in mm	Number of support profiles
30	8
45	10
57	12
70	18
85	18
97	20
110	24
137	30
164	36
215	48
268	48
305	40
380	48
460	60
510	64
625	80
914	180

Standard tolerances (tighter tolerances are possible on request through the use of special techniques).

Slot Size:	± 0.030 mm (max. ± 0.030) ± 0.1 mm (max. ± 0.2)	for O.D. ≤ 300 mm for O.D. > 300 mm
Diameter	± 0.3 mm ± 0.5 mm ± 2.5 mm	Ø < 164 mm 164 < Ø < 300 mm Ø > 300 mm
Length	± 2 mm ± 4 mm	Ø ≤ 300 mm Ø > 300 mm

 

PROFILE WIRE
WIDTH(mm)	1.50	1.50	2.30	2.30	1.80	3.00	3.70	3.30
HEIGHT(mm)	2.20	2.50	2.70	3.60	4.30	4.70	5.60	6.30

 

SUPPORT ROD						ROUND
WIDTH(mm)	2.30	2.30	3.00	3.70	3.30	Ø2.5--Ø5mm
HEIGHT(mm)	2.70	3.60	4.70	5.60	6.30	----