273mm Non Magnetic V Shaped Continuous Slot Water Wire Screen Tube

• Material: Stainless Steel AISI 304L
• Layers: Single
• Usage: Liquid Filter, Air Filter, Solid Filter
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: XL--128
• Type: Filter Elements
• Hole Shape: Square
• Structure: Single Network
• V Profile Wire: 3X4.6mm
• Wedge Support Wire: 4.0mm
• Male and Female ( Short) (Stc): Threaded Fitting
• Surface: Electrolytic Polishing
• Weight: 20kg/M
• Length: 3m
• Transport Package: Wooden Box, Pallet, Container
• Specification: 325mm x 1.0mm x 3m
• Trademark: Xinlu Wire Mesh
• Origin: Anping Xinlu Wire Mesh Products., Ltd, China
• HS Code: 84212990
• Production Capacity: 300PCS/Month
• Package Size: 310.00cm * 32.00cm * 40.00cm
• Package Gross Weight: 93.000kg

Product Description

273mm Non Magnetic Stainless Steel Vee Shaped Continuous Slot Water Wire Screen

 

wedge wire screens, v shaped wire welded stainless steel water well screens, low carbon galvanized water well screen, Johnson screen tube, johnson screen pipe, johnson well screen, johnson wire screen, johnson filter screen, johnson v wire screens,v wire slot tube, wire wrapped screen pipe, oil well screens, dewatering well screen, perfect roundness screen tube, profile wire screen pipe, reverse rolled screen tube, spiral screen tube, screen cylinders, rod based continous slot screens, sand conrol well screen, wire wound screen pipe, stainless steel filter elements, wedge wire roll screen, stainless steel strainer pipe,

273mm Non Magnetic Stainless steel Vee Shaped Continuous Slot Water Wire Screen
 
Continuous Slot Johnson type Water Wire Screen Use:
High Strength Continuous Slot Stainless Steel Water Wire Screen has been known as the world's leading manufacturer and provider of industrial filters since 1904.We provide screening solutions to almost every industry,including:
 
Water well
Water supply systems
Refining & petrochemical
Filter equipment
Drum Filter
Sand control
 
Continuous Slot Johnson Water Wire Screen Groundwater Product Description:
 
1: Continuous Slot Johnson Water Wire Screen Used For Drum FIlter is manufactured with V-shaped profile wire which is spirally wound around a cage of longitudinal support rods.
 
2: Each intersecting point of these wires is fusion welded. The pitch of winding gives different spacing between two adjacent turns of wire. This spacing gives passage for water to enter. The entire process is completed on fully computerized machines.
 
Continuous Slot Johnson type Water Wire Screen Specificarion:

Material	Non Magnetic Stainless steel
Diameter	10-3/4" ,  8-5/8"
O.D	273mm, 219mm
Slot Size	0.25mm
Length	5850mm
End connection	Welded rings
Wire shaped	Vee shaped
Wire size	2.2*4.5mm vee shaped wire, 2.2mm is the width and 4.5mm is the height
Support rod	ø5.0mm
Support rod shaped	Round wire

 
Continuous Slot Johnson Water Wire Screen Characteristic:
 
High Strength Continuous Slot Stainless Steel Water Wire Screen have superior open area due to their continuous slot openings.
The benefits of which will :

• Reduce energy consumption and increase water flow.
• Reduce erosion of entry surfaces and increase well life.
• Allow a uniform and efficient well development.
• Reduce significantly potential pump damage and subsequent maintenance costs.


Continuous Slot Water Wire Screen Tube Regular Specification:

Name: Johnson screen,Water wire screen,Water well screen, Wire warp screen,Wedge wire screen,  Screen tube,            Slotted tube,Wound screen,Continuous slot screen filter,Sand control screen, Wedge wire screen pipe,            Rotary filter drum,Oil screen.
Material: Stainless steel 304,316L,Non-magnetic Stainless steel, Low carbon galvanized,904L, Duplex steel etc.
Diameter: From 29-1300mm (Normal diameter is in the below table)
Slot: From 0.1-100mm (Normal slot 0.5mm, 0.63mm, 0.75mm, 1.0mm, 1.5mm, Pls refer to below table)
Length: From 100-6000mm (Normal length is 2.9m and 5.8m, to fit container)
Wrap wire:2x3.5mm,2.2x3.5mm,2.2x4.5mm,3x4.6mm,3x5mm,3x6mm,3x6.5mm,3.2x6mm, etc.
Support rod:ø3.0-ø6.0mm round wire, Also can be Vee-shaped wire.
Ends:Welded rings/Plain beveled ends,Male/female threaded,Flange etc.
Use:Water Well,Waste Water Treatment,Water supply systems,Coal & Mine,Food Processors &Beverage Screens,Environmental protection,Refining & Petrochemical,Architecture & Construction etc.
Sizes (inch)	OD (mm)	Slot (mm)	Length (m)	Tenslie Strength	Collapse Strength	Wrap wire Vee-shaped wire(mm)	Support rod Round wire(mm)
3-1/2	88.9	1.0	2.9	>22	10.2	2.2*3.5 (Width*height)	ø3.8MM×22
4-1/2	114.3	1.0	2.9	>28	11.5	2.2*3.5(Width*height)	ø3.8MM×22
6-5/8	168.3	0.75	5.8	>40	12.8	2.2*3.5(Width*height)	ø3.8MM×32
6-5/8	168.3	1.0	5.8	>33	12.8	2.2*3.5(Width*height)	ø3.8MM×32
6-5/8	168.3	0.63	5.8	>83	45	3.2*6.0(Width*height)	ø6.0MM×32
8-5/8	219.1	1.0	5.8	>34	21.9	2.3*3.5(Width*height)	ø3.8MM×48
8-5/8	219.1	1.0	5.8	>50	38.2	3.0*5.0(Width*height)	ø4.0MM×48
8-5/8	219.1	1.0	5.8	>60	46	3.2*6.0(Width*height)	ø5.0MM×48
10-3/4	273.1	0.75	5.8	>50	32.9	2.2*3.5(Width*height)	ø4.0MM×55
10-3/4	273.1	1.0	5.8	>60	39.5	3.0*4.6(Width*height)	ø4.8MM×55
10-3/4	273.1	1.0	5.8	>100	48	3.2*6.0(Width*height)	ø5.0MM×55
12-3/4	323.9	1.0	5.8	>120	37.2	3.0*5.0(Width*height)	ø4.0MM×56
14	355.6	1.0	2.9	>80	37.8	3.0*5.0(Width*height)	ø4.0MM×59
16	426	1.0	2.9	>80	37.5	3.0*5.0(Width*height)	ø4.0MM×54

 

Continuous Slot Water Wire Screen Tube Use:

water well

water supply systems

Refining & petrochemical

Filter equipment

Drum Filter

Sand control

 

Continuous Slot Water Wire Screen Tube OEM service:

 

We can produce products according to the needs of our customers.
Material: stainless steel 304, 316L, low carbon steel
Diameter: minimum diameter 32mm, maximum diameter 1270mm
Length: single tube can be up to 6 meters in length
Gap: 0.25mm, 0.5mm, 0.7mm, 1.0mm, 1.5mm is a regular gap. We can produce gaps of 0.1-50mm
Joints: Generally, there are joints at both ends of the pipe, such as flanges, weld rings, or threads, so that the pipes can be connected to meet the needs of use.

 

FAQ

 

Q1. Can I have a sample order?

A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.

 

Q2. What about the lead time?

A: 3-5 days for Sample preparing , 15-25 working days for mass production.

 

Q3. Do you have any MOQ limit for the order?

A: Low MOQ, 3pc for sample checking is available.

 

Q4. How do you ship the goods and how long does it take to arrive?

A: Airline, sea shipping and rail transportation are all optional.

Or ship by EMS, DHL, UPS, FedEx or TNT, it takes 5-7 days to arrive.

 

Q5. How to proceed an order?

A: Firstly let us know your need specification or application.

Secondly We quote according to your requirements or our suggestions.

Thirdly customer confirms and places deposit for formal order.

Fourthly We arrange the production.

 

Q6. Is it OK to print my logo on the product?

A: Yes. Please inform us formally before our production.